Laser Electronics Ltd

Millennium Pin-outs.

Ilda Connector 

X and Y coordinates (12 bit DACs)

Range is 0..4095. This signals is a bipolar analog signals. Voltage range is 10 volts peak-to-peak differential.

    0 represent (-10V) differential output voltage

    4095 - (+10V) differential output voltage

    2048 - (0V) differential output voltage

A differential voltage level of (-10) volts produce left side/bottom position of a beam.

A differential voltage level of (+10) volts produce right side/top position of a beam.

A differential voltage level of (0) volts produce centre position of a beam.

Connection:

+X - pin 1 Connector P1 (DB25F)

-X - pin 14 Connector P1 (DB25F)

+Y - pin 2 Connector P1 (DB25F)

-Y - pin 15 Connector P1 (DB25F)

+  Blanking - pin 3 Connector P1 (DB25)

- Blanking - pin 16 Connector P1 (DB25)

+ Red - pin 5 Connector P1 (DB25)

- Red - pin 18 Connector P1 (DB25)

+ Green - pin 6 Connector P1 (DB25)

- Green - pin 19 Connector P1 (DB25)

+ Blue - pin 7 Connector P1 (DB25)

- Blue pin 20 Connector P1 (DB25)

Shutter pin 13 Connector P1 (DB25)

Ground - pin 25 Connector P1 (DB25F)

R, G, B,  colour signals (8 bit DACs)

Range is 0..255. The signals are unipolar analog signals. Voltage range is 5 volts peak-to-peak differential.

    The Negative outputs of pins 18, 19, 20 can be connected to pin 25 to provide a single ended  positive output at pins 5, 6, 7.